IP/MPLS CPE typically contains the same functionality as the PE router, with a performance adequate for its use. Raisecom offers the best breed of IP/MPLS and CE for accessing customers by an end-to-end MPLS tunnel guaranteeing the best VPN performance conveying all the MPLS VPN benefits to the customers.
The RAX711-R, which is the most compact and cost effective MPLS CE, provides customers an affordable MPLS networks access product.
Raisecom introduces an outstanding solution to replace legacy TDM based leased line services with the similar quality at a lower cost, based on the price/bandwidth ratio. It mitigates the issues of the carrier losing performance monitoring and the capability to implement a Layer2 Ethernet device at lowered costs. In addition, it improves the service consistency on the customer’s premises with the MPLS tunnel, instead of a low performance router. It can work with the RAISECOM IP/MPLS PE router or interoperate with any other vendors on the existing MPLS aggregation network.
The ITN201-R series provides a comprehensive and scalable feature set of Layer 2 VPN (L2VPN), Layer 3 VPN (L3VPN), VRF-Lite services with routing, MPLS, clock synchronization technologies optimized for service providers. It also supports a broad set of hardware-based end-to-end OAM tools (IEEE802.1ah/IEEE802.3ag/Y.1731/RFC2544/Y.1564) to help providers reduce their OpEx and to assure the agreed SLA, like Jitter, delay and packet loss.
Raisecom ITN201-R series, as a new generation Ethernet/MPLS device, is optimized for access and pre-aggregation in IP/MPLS network. The ITN201-4GF-R series offers 56Gbps switch capability in a small 1RU form factor. It provides 4xGE uplinks + 12xGE downlinks and 2 sub slots which can insert Ethernet service cards with another 8xGE downlinks.
Raisecom ITN201-R series, as a new generation Ethernet/MPLS device, is optimized for access and pre-aggregation in IP/MPLS network. The ITN201-2XG-R series offers 56Gbps switch capability in a small 1RU form factor. It provides maximum to 4x10GE and 16xGE links.
• iTN200-SUB-4GE – GE expansion module, 4x1000MBase-Tx electrical ports
• iTN200-SUB-4GF – GE expansion module, 4x1000M SFP ports
• iTN200-SUB-2XG – 2x10GE XFP optical interface card, used with iTN201-2XG-R
|
P/N |
RAX711-R |
iTN201-2XG-R / iTN201-4GF-R |
|
Interfaces |
2 x GE SFP Interfaces uplink, 4 x GE Electrical Interfaces downlink / 4 x GE Combo Interfaces downlink; 4 x E1 Interfaces |
iTN201-4GF-R 4xGE SFP uplink with 12xGE(6xTSFP) downlinks and 2 sub slots for another 8 x GE downlinks iTN201-2XG-R 2x10GE XFP uplink with 12xGE(6xTSFP) downlinks and 2 sub slots for additional 2 x 10GE and 4 x GE or 8 x GE downlinks |
|
Technical Standards |
ITU-T G.8131, G.8031, and G.8032, G.8113.1, and BFD ITU-T Y.1731, IEEE 802.3ah, IEEE 802.1ag IETF RFC5860 and RFC2544 OSPF, BGP, MP-BGP, and VRRP MPLS, LDP, MPLS-TP, and MPLS QoS IETF RFC4664 L2VPN framework , VPWS, VPLS, and L3VPN |
ITU-T G.8131, G.8031, and G.8032 ITU-T Y.1731, IEEE 802.3ah, and IEEE 802.1ag BFD , ITU-T G.8113.1, IETF RFC5860, and IETF RFC2544 TE FRR and VRRP OSPF, BGP, and MP-BGP MPLS, LDP, and MPLS-TP IETF RFC4664 L2VPN framework VPWS, VPLS, and L3VPN MPLS QoS |
|
Dimensions |
220 ? 43.6 ? 180 mm3 |
440 ? 44 ? 266 mm3 |
|
Power Consumption |
<25W |
<60W |
|
Operating Environment |
Temperature(°C): -5 °C to 65 °C Humidity: 10%–90% RH |
Temperature(°C): -5 °C to 50 °C Humidity: 10%–90% RH |
RAX711-R
iTN201-2XG-R / iTN201-4GF-R
